Our projects and products

A little overview of what we can do for you

BVA Hot Air Gas Generator

The BVA (air vein burner) generator is a machine designed to produce heat to be fed directly into a stream of air to be heated and, because of its versatility, can be used for multiple purposes and installed directly in the recovery pipeline, becoming part of it.
Other construction solutions allow the BVA to be placed in the sidewall of masonry air ducts or on the walls of mixing chambers.
The BVA generator consists of a gas burner capable of operating in an air vein and a carpentry structure that forms the machine frame, as well as the combustion air distribution rail.
The generator's burner is modular in design to allow versatility in construction to accommodate all types of requirements.

Gas Burners

The main component of natural gas is methane (CH4), the smallest and lightest among the molecules of hydrocarbons.
It also normally contains heavier gaseous hydrocarbons such as ethane (CH3CH3), propane (CH3CH2CH3) and butane (CH3CH2CH2CH3), and, in small quantities, pentane.
Energy power: The combustion of one cubic meter of commercial type of natural gas generally produces about 38 MJ (10.6 kWh). More precisely, we have:

The gas burners / feeders in various versions, mono, dual fuel, pulse, can function with preheated combustion air from 150 °C to 500 °C.
The various models of the series implement the “flameless” combustion for the ULTRA LOW performances (NOx<100mg/Nm3 – Tair=500°C @1200°C).

Heavy & Light Oil Burners

SUPERTEC AIRFUEL: it is a liquid fuel feeder to be fitted in the ceiling of the kilns for heavy clay industry. The high infiltration capacity both at the bottom and in the middle of the stacked products makes this machine to be indispensable for the preparation and temperature rise in the first firing zone. Thanks to the mixing of air-fuel, the elimination of any unburned residues present in the smokes is allowed. The fuel sent to the pipes by means of a pumping and dosing circuit is injected at low pressure and sprayed by means of the mixing with air which is blown at high speed. In automatic mode, the maintenance of the predetermined temperature is maintained by an electronic control system that controls the modulation.

SUPERTEC IMPULSE: feed units for heavy oil or diesel with cyclic circuit impulse type. Fuel introduced under pressure,  even up to 80 bar, by a pump and sent to the individual injectors by means of a distributor unit.

Solid Fuel Burners

The use of a particular type of solid fuel burner is intimately linked to the type of kiln on which the burner is installed. Coal as well as pet coke or biomass products are cheap fuels and widespread in many countries of the world. India is one of those. Today, coal as fuel for kilns in India is generally used badly with coarse feeding systems with large and uncontrolled size of its particles. As a result an inefficient combustion, strong atmospheric pollution, high consumption, considerable workers effort, extremely hard work, is obtained. The use of a modern solid fuel burner makes possible to check the air / fuel ratio which is near to the stoichiometric ratio, also minimum quantity required as a function of the internal temperature of the furnace, reduction and perfect control of fuel granulometry. It is logic: reducing the granulometry of coal approaches it to gas characteristics with more efficiency in the combustion. 

MULTIJET SYSTEM - SELF GRINDING SYSTEM - CENTRALIZED GRINDING

Hybrid Burners

Logo

SUPERTEC SRL Sede legale VIA CARLO LAVERONI 37- 14100 ASTI (ITALY) Codice Fiscale e Partita IVA: 00460890759 
UFFICIO DELLE IMPRESE DI ASTI N. REA 113775 CAPITALE SOCIALE VERSATO Euro 50.000,00
info@supertecweb.com - supertec@pec.it

Abbiamo bisogno del vostro consenso per caricare le traduzioni

Per tradurre i contenuti del sito web utilizziamo un servizio di terze parti che potrebbe raccogliere dati sulla vostra attività. Si prega di rivedere i dettagli nell'informativa sulla privacy e accettare il servizio per vedere le traduzioni.